Add to Cart

Bjorn Setka 3D-Printed Saddle

The 137-gram carbon saddle with a 3D-printed pad

zoom_in
A Bjorn Setka saddle in 143 mm width sits on top of the Ostro's included carbon seat post.
zoom_in
Bjorn Setka 3D-printed saddle, from above
zoom_in
Bjorn Setka 3D-printed saddle, side profile
zoom_in
Bjorn Setka 3D-printed saddle, carbon shell and rails from below
zoom_in
Bjorn Setka 3D-printed saddle, fitted to a seatpost
zoom_in
Bjorn Setka 3D-printed saddle, side profile on a seatpost
zoom_in
Orbea Oiz Dropper Post
zoom_in
A Bjorn Setka saddle sits atop the GT-Zero's custom-painted seat post.
zoom_in
A Bjorn Setka 3D-printed saddle on a Sarto Raso TC, a Regroup custom build
zoom_in
A Bjorn Setka 3D-printed saddle on a Sarto Cima, a Regroup custom build
zoom_in
Sarto Cima with SRAM Red AXS and ENVE SES 4.5 Pro wheels
Bjorn Saddles
Bjorn Setka 3D-Printed Saddle

The Setka pairs a carbon shell and carbon rails with a 3D-printed pad that’s softer at the front and firmer at the rear. It weighs 137 grams, and it’s a regular on Regroup custom builds.

$420.00

SKU: N/A Categories: ,
Size Guide straighten
Sit-bone width
Saddle width
115 to 125 mm
143 mm
125 to 140 mm
155 mm
SPECIFICATIONS add
Weight
137 g
Length
250 mm
Widths
143 mm, 155 mm
Shell
Carbon
Rails
Carbon, 7x9 mm
Rail to saddle top
30 to 35 mm, depending on position on the seatpost
Weight limit
120 kg, rider plus saddle bag
Pad
3D-printed, made by Carbon in the USA
Best for
Road, gravel, XC
UCI legal
Yes
replyFree and easy returnsclose

Enjoy free, frictionless U.S. returns when you purchase this item. If it's not quite right, or something else has you in two minds, you can request a pre-paid return shipping label to send it back to us for a full refund. Naturally, some conditions apply. Read our returns policy.

package_2Eligible for Free Shippingclose

All orders over $75 at Regroup benefit from free U.S. shipping as standard. We process all orders the same day or the next, depending on when you place your order (excluding weekends and holidays).

More about the Setka

The Setka’s pad is designed and produced by Carbon in the USA using Digital Light Synthesis, a 3D-printing process that allows precise control of density and flex. The front is softer, to take pressure off soft tissue when you’re riding low. The rear is firmer, for support when you’re climbing.

Underneath is Bjorn’s carbon shell, with a triangular reinforcement pattern and carbon rails that are inserted into reinforced slots instead of being glued. The whole saddle weighs 137 grams.

It’s a traditional shape, 250 mm long, which Bjorn recommends for road, gravel and XC. We’ve fitted it to Factor, Parlee, Sarto and Mosaic builds, a few of our own among them.

Setka or Kort? add
Both have 3D-printed pads on a carbon shell. The Setka is the traditional shape at 250 mm, for a neutral position and for riders who move around on the saddle. The Kort is 220 mm with a short nose, for a forward-rotated aero position. The Setka is UCI legal and the Kort isn’t.
Will it fit my seatpost? add
The rails are oval carbon, 7x9 mm, so your seatpost clamp needs to be made for 7x9 rails. A clamp made only for round 7 mm rails isn’t suitable. Many posts take them as standard and others need a different clamp. If you’re not sure about yours, ask us before you order.

Also Explore

Visit Shop arrow_forward
Bjorn Kort Short-Nose 3D-Printed SaddleBjorn Kort Short-Nose 3D-Printed Saddle

Bjorn Saddles

Bjorn Kort Short-Nose 3D-Printed Saddle

Roadroad

$440.00
Bjorn Divan Leather SaddleBjorn Divan Leather Saddle

Bjorn Saddles

Bjorn Divan Leather Saddle

Roadroad

$480.00
Bjorn Probka Cork SaddleBjorn Probka Cork Saddle

Bjorn Saddles

Bjorn Probka Cork Saddle

Roadroad

$319.00

STORIES FROM THE REVIEW

ALL ENTRIES arrow_forward

About the brand

Bjorn Saddles

Bjorn Saddles EXPLORE BJORN SADDLES

Bjorn builds carbon saddles by hand in Domžale, Slovenia: 3D-printed, cork-topped and leather-covered, from 107 grams. The Setka is a regular on Regroup custom builds.

EXPLORE BJORN SADDLES Bjorn Saddles