Add to Cart

Bjorn Kort Short-Nose 3D-Printed Saddle

A 117-gram short-nose saddle for aero positions

zoom_in
Bjorn Kort short-nose 3D-printed saddle, from above
zoom_in
Bjorn Kort short-nose 3D-printed saddle, side profile
zoom_in
Bjorn Kort short-nose 3D-printed saddle, carbon shell and rails from below
zoom_in
Bjorn Kort short-nose 3D-printed saddle, fitted to a seatpost
zoom_in
Bjorn Kort short-nose 3D-printed saddle, side profile on a seatpost
Bjorn Saddles
Bjorn Kort Short-Nose 3D-Printed Saddle

The Kort is Bjorn’s short-nose saddle: 220 mm long and 117 grams, with a multi-zone 3D-printed pad on a carbon shell. Bjorn developed it for triathlon and time trial, and for riding low on the road and gravel.

$440.00

SKU: N/A Categories: ,
Size Guide straighten
Sit-bone width
Saddle width
115 to 125 mm
143 mm
125 to 140 mm
155 mm
SPECIFICATIONS add
Weight
117 g
Length
220 mm
Widths
143 mm, 155 mm
Shell
Carbon
Rails
Carbon, 7x9 mm
Rail to saddle top
30 to 35 mm, depending on position on the seatpost
Weight limit
120 kg, rider plus saddle bag
Nose
40 mm wide, 49 mm at the cutout
Pad
3D-printed, multi-zone
Best for
Triathlon, TT, aero road and gravel
UCI legal
No, 20 mm under the 240 mm minimum
replyFree and easy returnsclose

Enjoy free, frictionless U.S. returns when you purchase this item. If it's not quite right, or something else has you in two minds, you can request a pre-paid return shipping label to send it back to us for a full refund. Naturally, some conditions apply. Read our returns policy.

package_2Eligible for Free Shippingclose

All orders over $75 at Regroup benefit from free U.S. shipping as standard. We process all orders the same day or the next, depending on when you place your order (excluding weekends and holidays).

More about the Kort

Bjorn developed the Kort for triathlon and time trial, and for anyone who rides road or gravel in an aggressive, forward-rotated position. The short nose keeps your inner thighs clear of the tip, and the width keeps you stable when you’re rotated forward. Sit further back and it works in a more upright road position too.

The 3D-printed pad was designed from scratch for this shape, with zones of different firmness that increase the contact area and absorb road vibration. It sits on a carbon shell with a triangular reinforcement pattern, and the carbon rails are inserted into reinforced slots instead of being glued.

At 220 mm, the Kort is 20 mm under the UCI’s minimum saddle length. Some makers add a plastic tail to reach 240 mm. Bjorn didn’t, and puts a pack of “UCI Illegal” stickers in the box.

Is the Kort UCI legal? add
No. The UCI requires a saddle to be at least 240 mm long and the Kort is 220 mm. That only matters if you race UCI-sanctioned events. If you do, the Setka also has a 3D-printed pad on a carbon shell, and it’s legal.
Will it fit my seatpost? add
The rails are oval carbon, 7x9 mm, so your seatpost clamp needs to be made for 7x9 rails. A clamp made only for round 7 mm rails isn’t suitable. Many posts take them as standard and others need a different clamp. If you’re not sure about yours, ask us before you order.

Also Explore

Visit Shop arrow_forward
Bjorn Setka 3D-Printed SaddleBjorn Setka 3D-Printed Saddle

Bjorn Saddles

Bjorn Setka 3D-Printed Saddle

Roadroad

$420.00
Bjorn Divan Leather SaddleBjorn Divan Leather Saddle

Bjorn Saddles

Bjorn Divan Leather Saddle

Roadroad

$480.00
Bjorn Probka Cork SaddleBjorn Probka Cork Saddle

Bjorn Saddles

Bjorn Probka Cork Saddle

Roadroad

$319.00

STORIES FROM THE REVIEW

ALL ENTRIES arrow_forward

About the brand

Bjorn Saddles

Bjorn Saddles EXPLORE BJORN SADDLES

Bjorn builds carbon saddles by hand in Domžale, Slovenia: 3D-printed, cork-topped and leather-covered, from 107 grams. The Setka is a regular on Regroup custom builds.

EXPLORE BJORN SADDLES Bjorn Saddles